File:2017YE5 2018Jun26.gif

No higher resolution available.

2017YE5_2018Jun26.gif ‎(240 × 240 pixels, file size: 147 KB, MIME type: image/gif, looped, 4 frames, 1.6 s)

Captions

English

Animation of the delay-Doppler images obtained by Arecibo on June 26, 2018 over the hour observing period.

Summary[edit]

Description2017YE5 2018Jun26.gif	English: Delay-Doppler images of near-Earth asteroid 2017 YE5 using the Arecibo S-band radar on June 26, 2018 with a range resolution of 7.5 m (25 ft) per pixel.
Date	26 June 2018
Source	Press release: http://www.naic.edu/~pradar/press/2017YE5.php Direct image link: http://www.naic.edu/~pradar/images/2017YE5.2018Jun26.7p5mx0p02Hz.AO.gif
Author	Arecibo Observatory/NASA/NSF
Other versions

Licensing[edit]

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	01:35, 17 February 2020		240 × 240 (147 KB)	Nrco0e (talk \| contribs)	User created page with UploadWizard

You cannot overwrite this file.

File usage on Commons

The following 2 pages use this file:

File usage on other wikis

The following other wikis use this file:

Usage on en.wikipedia.org
- 2017 YE5

Metadata

This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.

GIF file comment

FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -9.60403383487574e-08 s added: Range curvature correction Closed-loop time estimated from baud If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -4.30822240105044e-08 s added: Range curvature correction Closed-loop time estimated from baud If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.33597154672316e-07 s added: Range curvature correction Closed-loop time estimated from baud If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.
FITS (Flexible Image Transport System) format is defined in 'Astronomy and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H The RX start time is a reasonable approximation to the experiment mid-time. A more accurate mid-time is DATE-OBS + (EXPTIME-RTT)/2 which is typically about 3s earlier Additional -1.21537816255568e-07 s added: Range curvature correction Closed-loop time estimated from baud If FREQSAMP < FFTLEN, then the transform was zero-filled SAMPPBD is the number of input samples taken per baud. ROWSPBD is the number of output image rows saved per baud. ROWSPBD and SAMPPBD may differ either because data were thrown away, or because the extra samples were used in the frequency processing. CODEPROC is the code processing method: values are short, long_orig, or long_mod. short means short-code data processed so that each Doppler fft includes data from all samples per baud; long_mod means long-code data processed in the same way; long_orig means long-code data where each sample per baud is processed separately and the separate images are then interleaved in delay.

File:2017YE5 2018Jun26.gif

Captions

Captions

Summary[edit]

Licensing[edit]

File history

File usage on Commons

File usage on other wikis

Metadata

Structured data

Items portrayed in this file

depicts

2017 YE5

media type

image/gif

checksum

5c52416caf81711dc20f86a8a77fddb38a28a09a

data size

150,312 byte

duration

1.6 second

height

240 pixel

width

240 pixel

Navigation menu

File:2017YE5 2018Jun26.gif

Captions

Captions

Summary[edit]

Licensing[edit]

File history

File usage on Commons

File usage on other wikis

Metadata

Navigation menu

Search